60974-92-7

• 常用中文名：9,10-双(二乙基膦甲基)蒽
• 常用英文名：9,10-Bis(diethylphosphonomethyl)anthracene
• CAS号：60974-92-7
• 分子式：C₂₄H₃₂O₆P₂
• 分子量：478.45500
• 相关类别： 化学试剂 有机试剂 多环化合物
• 发布时间：2018-07-17 05:13:49
• 更新时间：2024-01-09 12:08:06

名称

• 中文名: 9,10-双(二乙基膦甲基)蒽
• 英文名: 9,10-Bis(diethylphosphonomethyl)anthracene
• 中文别名: 9,10-双(二乙氧基膦酰甲基)蒽
• 英文别名: 9,10-bis(diethoxyphosphorylmethyl)anthracene

物化性质

• 密度: 1.207g/cm3
• 沸点: 634.9ºC at 760 mmHg
• 熔点: 158.0 to 162.0 °C
• 分子式: C₂₄H₃₂O₆P₂
• 分子量: 478.45500
• 闪点: 350.4ºC
• 精确质量: 478.16700
• PSA: 90.68000
• LogP: 7.52520
• 外观性状: 固体;White to Yellow powder to crystal
• 折射率: 1.567
• 储存条件:

  在密封的贮藏器内，并放置阴凉，干燥的地方保存

• 稳定性:

  避免接触氧化物

• 水溶解性: 可溶于：甲苯
• 计算化学:

  1.疏水参数计算参考值（XlogP）:4

  2.氢键供体数量:0

  3.氢键受体数量:6

  4.可旋转化学键数量:12

  5.互变异构体数量:无

  6.拓扑分子极性表面积71.1

  7.重原子数量:32

  8.表面电荷:0

  9.复杂度:571

  10.同位素原子数量:0

  11.确定原子立构中心数量:0

  12.不确定原子立构中心数量:0

  13.确定化学键立构中心数量:0

  14.不确定化学键立构中心数量:0

  15.共价键单元数量:1

• 更多:

  1. 性状：未确定

  2. 密度（g/cm³ 20 ºC ）：未确定

  3. 相对蒸汽密度（g/mL,空气=1）：未确定

  4. 熔点（ºC）：未确定

  5. 沸点（ºC，12mmHg）：未确定

  6. 沸点（ºC,5.2kPa）：未确定

  7. 折射率（°）：未确定

  8. 闪点（ºC，3mmHg）：未确定

  9. 比旋光度（º）：未确定

  10. 自燃点或引燃温度（ºC）：未确定

  11. 蒸气压（kPa,25ºC）：未确定

  12. 饱和蒸气压（kPa,60ºC）：未确定

  13. 燃烧热（KJ/mol）：未确定

  14. 临界温度（ºC）：未确定

  15. 临界压力（KPa）：未确定

  16. 油水（辛醇/水）分配系数的对数值（25℃）：未确定

  17. 爆炸上限（%,V/V）：未确定

  18. 爆炸下限（%,V/V）：未确定

  19. 溶解性(mg/mL)：水：未确定

MSDS

Section I.Chemical Product and Company Identification Chemical Name 9,10-Bis(diethylphosphonomethyl)anthracene Portland OR SynonymPhosphonic acid, P,P'-[9,10-anthracenediylbis (methylene)]bis-, P,P,P',P'-tetraethyl ester (CA INDEX NAME); Tetraethyl [Anthracene-9,10-diylbis(methylene)]bisphos phonate; [Anthracene-9,10-diylbis(methylene)]bisphos phonic Acid Tetraethyl Ester Chemical FormulaC24H32O6P2 In case ofChemtrec® CAS Number60974-92-7 Section II.Composition and Information on Ingredients Toxicology Data Chemical NameCAS Number Percent (%)TLV/PEL 60974-92-7 Min. 98.0 (GC) Not available.Not available. 9,10-Bis(diethylphosphonomethyl)anthracene Section III. Hazards Identification Acute Health EffectsNo specific information is available in our data base regarding the toxic effects of this material for humans. However, exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this compound. Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound. Chronic Health EffectsCARCINOGENIC EFFECTS : Not available. MUTAGENIC EFFECTS : Not available. TERATOGENIC EFFECTS : Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions. Section IV.First Aid Measures Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 Eye Contact minutes. Get medical attention. Skin ContactIn case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or Inhalation waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not improve. IngestionINDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive. Section V.Fire and Explosion Data Not available. May be combustible at high temperature.Auto-Ignition Flammability Flash PointsFlammable LimitsNot available. Not available. These products are toxic carbon oxides (CO, CO2), phosphates. Combustion Products Fire Hazards Not available. Risks of explosion of the product in presence of mechanical impact: Not available. Explosion Hazards Risks of explosion of the product in presence of static discharge: Not available. Fire Fighting Media SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet. and Instructions Consult with local fire authorities before attempting large scale fire-fighting operations. Continued on Next Page 9,10-Bis(diethylphosphonomethyl)anthracene Section VI.Accidental Release Measures Spill CleanupUse a shovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for assistance on Instructions disposal. Section VII. Handling and Storage Handling and StorageKeep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a dry, cool place. Avoid excessive heat and light. Do not breathe dust. Information Always store away from incompatible compounds such as oxidizing agents. Section VIII. Exposure Controls/Personal Protection Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended Engineering Controls exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Splash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a Personal Protection specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent. Exposure LimitsNot available. Section IX. Physical and Chemical Properties Solid. (yellow powder)Solubility Physical state @ 20°CSoluble in toluene. Not available. Specific Gravity 478.45 Molecular WeightPartition CoefficientNot available. Boiling PointNot available.Vapor PressureNot applicable. Not available.Not available. Melting PointVapor Density Not available.VolatilityNot available. Refractive Index Not available. Critical TemperatureNot available.Odor ViscosityNot available.TasteNot available. Section X.Stability and Reactivity Data Stability This material is stable if stored under proper conditions. (See Section VII for instructions) Conditions of InstabilityAvoid excessive heat and light. Incompatibilities Reactive with oxidizing agents. Section XI. Toxicological Information Not available. RTECS Number Routes of ExposureEye Contact. Ingestion. Inhalation. Not available. Toxicity Data Chronic Toxic EffectsCARCINOGENIC EFFECTS : Not available. MUTAGENIC EFFECTS : Not available. TERATOGENIC EFFECTS : Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions. Acute Toxic EffectsNo specific information is available in our data base regarding the toxic effects of this material for humans. However, exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this compound. Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound. Section XII.Ecological Information Not available. Ecotoxicity Not available. Environmental Fate Continued on Next Page 9,10-Bis(diethylphosphonomethyl)anthracene Section XIII. Disposal Considerations Waste DisposalRecycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section XIV. Transport Information Not a DOT controlled material (United States). DOT Classification PIN NumberNot applicable. Proper Shipping NameNot applicable. Packing Group (PG)Not applicable. DOT Pictograms Section XV. Other Regulatory Information and Pictograms TSCA Chemical InventoryThis product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40 CFR 720.36 (C) for those products not on the inventory list: (EPA) (i) These products are supplied solely for use in research and development by or under the supervision of a technically qualified individual as defined in 40 CFR 720.0 et sec. (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be supplied on an MSDS sheet. WHMIS ClassificationNot controlled under WHMIS (Canada). (Canada) EINECS Number (EEC)Not available. EEC Risk StatementsNot available. SECTION 16 - ADDITIONAL INFORMATION N/A

毒性和生态

生态学数据: 若无政府许可，勿将材料排入周围环境

安全

• 危害码 (欧洲): Xi
• 海关编码: 2916190090

合成路线

10387-13-0 122-52-1 ~94% 60974-92-7

文献：Seo, Bo Min; Seo, Ji Hoon; Kim, Jun Ho; Park, Jung Sun; Lee, Kum-Hee; Park, Min Hye; Yoon, Seung Soo; Kim, Young Kwan Molecular Crystals and Liquid Crystals, 2011 , vol. 550, p. 233 - 239

120-12-7 ~% 60974-92-7

文献：Angewandte Chemie, International Edition, , vol. 51, # 43 p. 10782 - 10785,4 Angewandte Chemie, , vol. 124, # 43 p. 10940 - 10943,4

78-40-0 10387-13-0 ~68% 60974-92-7

文献：Liu, Wei; Wang, Yalong; Sun, Mingxiao; Zhang, Deteng; Zheng, Meng; Yang, Wenjun Chemical Communications, 2013 , vol. 49, # 54 p. 6042 - 6044

34373-96-1 122-52-1 ~% 60974-92-7

文献：Chemistry - An Asian Journal, , vol. 6, # 3 p. 808 - 811

上下游产品

上游产品  5
10387-13-0 122-52-1 120-12-7 78-40-0
34373-96-1
下游产品  0

海关

海关编码	2916190090
中文概述	2916190090 其他不饱和无环一元羧酸（包括其酸酐、酰卤化物，过氧化物和过氧酸以及它们的衍生物）。监管条件:AB(入境货物通关单,出境货物通关单)。增值税率:17.0%。退税率:9.0%。最惠国关税:6.5%。普通关税:30.0%
申报要素	品名, 成分含量, 用途, 丙烯酸、丙烯酸盐或酯应报明包装
监管条件	A.入境货物通关单 B.出境货物通关单
检验检疫	R.进口食品卫生监督检验 S.出口食品卫生监督检验 M.进口商品检验 N.出口商品检验
Summary	2916190090 unsaturated acyclic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives。supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward)。VAT:17.0%。tax rebate rate:9.0%。MFN tariff:6.5%。general tariff:30.0%