25736-86-1

• 常用中文名：聚(乙二醇)甲基丙烯酸酯
• 常用英文名：POLY(ETHYLENE GLYCOL) METHACRYLATE
• CAS号：25736-86-1
• 分子式：C₂₄H₄₆O₁₂
• 分子量：526.61500
• 相关类别： 催化剂及助剂 聚合物
• 发布时间：2018-02-25 08:00:00
• 更新时间：2024-01-02 09:58:22
• 下载msds

名称

• 中文名: 聚乙二醇甲基丙烯酸酯
• 英文名: poly(ethylene glycol) (n) monomethacrylate
• 中文别名: α-(2-甲基-2-丙烯酰基)-ω-甲氧基-聚乙二醇,甲氧基聚乙二醇的甲基丙烯酸酯; α-(2-甲基-2-丙烯酰基)-ω-甲氧基-聚乙二醇; 聚乙二醇单甲醚单甲基丙烯酸酯; 甲氧基聚乙二醇的甲基丙烯酸酯; 聚(乙二醇)甲基丙烯酸酯
• 英文别名: POLYETHYLENE GLYCOL 8000 MONOMETHACRYLATE; Methacrylicacid,polyethyleneglycolmonoester; POLYETHYLENE GLYCOL 2000 MONOMETHACRYLATE; ETHOXYLATEDHYDROXYETHYLMETHACRYLATE; POLYETHYLENE GLYCOL 4000 MONOMETHACRYLATE; POLYETHYLENE GLYCOL 3000 MONOMETHACRYLATE; POLYETHYLENE GLYCOL 1000 MONOMETHACRYLATE

物化性质

• 密度: 1.105 g/mL at 25ºC
• 沸点: >300ºC
• 分子式: C₂₄H₄₆O₁₂
• 分子量: 526.61500
• 闪点: >230 °F
• 精确质量: 526.29900
• PSA: 129.60000
• LogP: 0.24740
• 外观性状: 无色 液体
• 折射率: n20/D 1.467
• 储存条件:

  密封于阴凉干燥环境中

• 稳定性:

  遵照规定使用和储存则不会分解。

• 分子结构:

  1、摩尔折射率：无可用

  2、 摩尔体积（cm³/mol）：无可用

  3、 等张比容（90.2K）：无可用

  4、 表面张力（dyne/cm）：无可用

  5、 极化率：无可用

• 计算化学:

  1、 疏水参数计算参考值（XlogP）：0.5

  2、 氢键供体数量：1

  3、 氢键受体数量：3

  4、 可旋转化学键数量：4

  5、 拓扑分子极性表面积（TPSA）：46.5

  6、 重原子数量：9

  7、 表面电荷：0

  8、 复杂度：118

  9、 同位素原子数量：0

  10、 确定原子立构中心数量：0

  11、 不确定原子立构中心数量：0

  12、 确定化学键立构中心数量：0

  13、 不确定化学键立构中心数量：0

  14、 共价键单元数量：1

• 更多:

  1. 性状：无可用

  2. 密度（g/mL,25/4℃）：1.105

  3. 相对蒸汽密度（g/mL,空气=1）：无可用

  4. 熔点（ºC）：无可用

  5. 沸点（ºC,常压）：大于300

  6. 沸点（ºC,5.2kPa）：无可用

  7. 折射率：1.467

  8. 闪点（ºC）：大于113

  9. 比旋光度（º）：无可用

  10. 自燃点或引燃温度（ºC）：无可用

  11. 蒸气压（kPa,25ºC）：无可用

  12. 饱和蒸气压（kPa,60ºC）：无可用

  13. 燃烧热（KJ/mol）：无可用

  14. 临界温度（ºC）：无可用

  15. 临界压力（KPa）：无可用

  16. 油水（辛醇/水）分配系数的对数值：无可用

  17. 爆炸上限（%,V/V）：无可用

  18. 爆炸下限（%,V/V）：无可用

  19. 溶解性：无可用

MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name: Poly(ethylene glycol) methacrylate REACH No.: A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. CAS-No.: 25736-86-1 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Skin irritation (Category 2), H315 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC Xi IrritantR38 For the full text of the R-phrases mentioned in this Section, see Section 16. Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal wordWarning Hazard statement(s) H315Causes skin irritation. Precautionary statement(s)none Supplemental Hazardnone Statements Other hazards - none SECTION 3: Composition/information on ingredients Substances Formula: H2C=C(CH3)CO(OCH2CH2)nOH CAS-No.: 25736-86-1 Hazardous ingredients according to Regulation (EC) No 1272/2008 ComponentClassificationConcentration Poly(ethylene glycol) methacrylate CAS-No.25736-86-1Skin Irrit. 2; H315<= 100 % EC-No.500-042-4 For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 SECTION 4: First aid measures Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. For personal protection see section 8. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. May darken on storage Specific end use(s) A part from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Do not let product enter drains. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) AppearanceForm: liquid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and no data available boiling range g) Flash point113 °C - closed cup h) Evapouration rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative density1,101 g/mL at 25 °C n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available SECTION 10: Stability and reactivity Reactivity no data available Chemical stability Stable under recommended storage conditions. Contains the following stabiliser(s): Mequinol (900 ppm) Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong bases, Polymerizing initiators, Peroxides, Strong oxidizing agents, Copper, Steel (all types and surface treatments), Iron and iron salts. Hazardous decomposition products Other decomposition products - no data available In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitisation no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Additional Information RTECS: Not available SECTION 12: Ecological information Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other adverse effects no data available SECTION 13: Disposal considerations Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: -IMDG: -IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA:Not dangerous goods Transport hazard class(es) ADR/RID: -IMDG: -IATA: - Packaging group ADR/RID: -IMDG: -IATA: - Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A

毒性和生态

生态学数据: 该物质对环境可能有危害，对水体应给予特别注意。

安全

• 符号: GHS07
• 信号词: Warning
• 危害声明: H315
• 个人防护装备: Eyeshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
• 危害码 (欧洲): Xi
• 风险声明 (欧洲): R38
• 安全声明 (欧洲): 26-36/37/39
• 危险品运输编码: NONH for all modes of transport
• WGK德国: 3