前往化源商城
入驻化源商城

19757-13-2

19757-13-2结构式
19757-13-2结构式

化源商城直购

英文名 4-nitro-N-[(4-nitrophenyl)sulfamoyl]aniline
英文别名 p,p'-Dinitro-N,N'-sulfonyldianilin
4.4'-Dinitro-sulfanilid
N.N'-Bis-<4-nitro-phenyl>-sulfamid
T0504-5501
密度 1.683g/cm3
沸点 555.6ºC at 760mmHg
分子式 C12H10N4O6S
分子量 338.29600
闪点 289.8ºC
精确质量 338.03200
PSA 158.22000
LogP 4.54500
蒸汽压 2.2E-12mmHg at 25°C
折射率 1.723
Version 1.2
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameN,N'-BIS(4-NITROPHENYL)SULFAMIDE

2 - Hazards Identification

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
N,N'-BIS(4-NITROPHENYL)SULFAMIDE NoneNoneNone

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
ALDRICHwww.molbase.com
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid contact and inhalation. Do
not get in eyes, on skin, on clothing.
STORAGE
Conditions of Storage: Keep tightly closed. Store in a cool dry
place.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection from nuisance levels of dusts are desired, use type N95
(US) or type P1 (EN 143) dust masks.
Hand Protection: Rubber gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Solid
PropertyValueAt Temperature or Pressure
pHN/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing PropertiesN/A
Explosive PropertiesN/A
Explosion LimitsN/A
Vapor PressureN/A
Partition CoefficientN/A
ALDRICHwww.molbase.com
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents, Strong bases, Strong
acids.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides, Sulfur oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Inhalation: Material is irritating to mucous membranes and upper
respiratory tract.
Multiple Routes: Causes eye and skin irritation. May be harmful
by inhalation, ingestion, or skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental
regulations.

14 - Transport Information

15 - Regulatory Information

Caution: Substance not yet fully tested (EU).
COUNTRY SPECIFIC INFORMATION
ALDRICHwww.molbase.com
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A
上游产品  1

下游产品  2