前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里



查看所有供应商和价格请点击:

1270-98-0生产厂家

1270-98-0价格

1270-98-0

1270-98-0结构式
1270-98-0结构式

化源商城直购

中文名 三氯一茂钛
英文名 cyclopentadienyltitanium trichloride
中文别名 三氯化环戊二烯基钛
环戊二烯钛三氯化物
(Η-环戊二烯基)三氯化钛
环戊二烯基三氯化钛(IV)
英文别名 (cyclopentadienyl)TiCl3
MFCD00003724
Cyclopenta-1,3-dien-1-yltitanium(3+) trichloride
TRICHLORO(CYCLOPENTADIENYL)TITANIUM(IV)
trichlorocyclopentadienyl-titaniu
Trichloro(cyclopentadienyl)titanium
Cyclopentadienyltitanium trichloride
Cyclopentadienyltrichlorotitanium
Trichloro(cyclopentyldienyl)titanium
Cyclopentadiene titanium trichloride
1,3-Cyclopentadien-1-yltitanium(3+) trichloride
Titanium(3+), 1,3-cyclopentadien-1-yl-, chloride (1:3)
CyclopentadienyltitaniuM(IV) Trichloride
沸点 41.5ºCat 760 mmHg
熔点 210 °C (dec.)(lit.)
分子式 C5H5Cl3Ti
分子量 219.319
闪点 >210ºC
精确质量 217.893631
LogP 3.09000
外观性状 固体;Light yellow to Brown powder to crystaline
蒸汽压 418mmHg at 25°C
折射率 1.47
储存条件

保持贮藏器密封、储存在阴凉、干燥的地方,确保工作间有良好的通风或排气装置

稳定性

如果遵照规格使用和储存则不会分解,未有已知危险反应,避免氧化物、水分/潮湿

分子结构

1、摩尔折射率:无可用的

2、摩尔体积(cm3/mol):无可用的

3、等张比容(90.2K):无可用的

4、表面张力(dyne/cm):无可用的

5、介电常数:无可用的

6、极化率(10-24cm3):无可用的

7、单一同位素质量:217.89363 Da

8、标称质量:218 Da

9、平均质量:219.3192 Da

计算化学

1、 氢键供体数量:0

2、 氢键受体数量:5

3、 可旋转化学键数量:0

4、 拓扑分子极性表面积(TPSA):0

5、 重原子数量:9

6、 表面电荷:-5

7、 复杂度:66.1

8、 同位素原子数量:0

9、 确定原子立构中心数量:0

10、 不确定原子立构中心数量:0

11、 确定化学键立构中心数量:0

12、 不确定化学键立构中心数量:0

13、 共价键单元数量:2

更多

1. 性状:橙色或黄色粉末

2. 密度(g/cm3,20℃):未确定

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):210

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,1mmHg):未确定

7. 折射率(n20/D):未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(mmHg,20ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:反应

Name: Cyclopentadienyltitanium Trichloride Material Safety Data Sheet
Synonym: Cyclopentadienyltitanium(IV) trichloride; Cyclopentadienyltrichlorotitanium; pi-Cyclopentadienyltrichlorotitanium(IV); Titanium, trichlorocyclopentadienyl-; Titanium, trichloro-pi-cyclopentadienyl-; Titanium, trichloro(eta(sup 5)-2,4-c
CAS: 1270-98-0
Section 1 - Chemical Product MSDS Name:Cyclopentadienyltitanium Trichloride Material Safety Data Sheet
Synonym:Cyclopentadienyltitanium(IV) trichloride; Cyclopentadienyltrichlorotitanium; pi-Cyclopentadienyltrichlorotitanium(IV); Titanium, trichlorocyclopentadienyl-; Titanium, trichloro-pi-cyclopentadienyl-; Titanium, trichloro(eta(sup 5)-2,4-c

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1270-98-0 Cyclopentadienyltitanium Trichloride 100 unlisted
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause headache. May cause nausea and vomiting.
Inhalation:
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not get water inside containers.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Wash hands before eating. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Keep container tightly closed. Do not get on skin or in eyes.
Use with adequate ventilation. Do not allow contact with water.
Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1270-98-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Powder
Color: yellow-orange
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 170 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 210 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H5Cl3Ti
Molecular Weight: 219.36

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, titanium/titanium oxides.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1270-98-0: XR1927300 LD50/LC50:
Not available.
Carcinogenicity:
Cyclopentadienyltitanium Trichloride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1270-98-0: No information available.
Canada
CAS# 1270-98-0 is listed on Canada's DSL List.
CAS# 1270-98-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1270-98-0 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

毒理学数据:

1、急性毒性:小鼠注射LD50:130mg/kg

生态学数据:

对是水稍微有危害的不要让未稀释或大量的产品接触地下水、水道或者污水系统,若无政府许可,勿将材料排入周围环境。

CHEMICAL IDENTIFICATION

RTECS NUMBER :
XR1927300
CHEMICAL NAME :
Titanium(IV), pi-cyclopentadienyltrichloro-
CAS REGISTRY NUMBER :
1270-98-0
LAST UPDATED :
199403
DATA ITEMS CITED :
1
MOLECULAR FORMULA :
C5-H5-Cl3-Ti
MOLECULAR WEIGHT :
219.35

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Parenteral
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
130 mg/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
EJMCA5 European Journal of Medicinal Chemistry--Chimie Therapeutique. (Editions Scientifiques Elsevier, 29 rue Buffon, F-75005, Paris, France) V.9- 1974- Volume(issue)/page/year: 19,347,1984

危害码 (欧洲) C
风险声明 (欧洲) R34
安全声明 (欧洲) S26-S28-S36/37/39-S45
危险品运输编码 UN 3261 8/PG 2
WGK德国 3
RTECS号 XR1927300
包装等级 II
危险类别 8
海关编码 2931900090
海关编码 2931900090
中文概述 2931900090. 其他有机-无机化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:AB(入境货物通关单,出境货物通关单). 最惠国关税:6.5%. 普通关税:30.0%
Summary 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%