中文名 | Fmoc-L-3,4-二氯苯丙氨酸 |
---|---|
英文名 | Fmoc-3,4-dichloro-L-phenylalanine |
英文别名 |
RARECHEM BK PT 0117
Fl170-1 FMOC-D-3,4-Dichl FMOC-3,4-DICHLORO-D-PHE-OH D-Phenylalanine, 3,4-dichloro-N-[(9H-fluoren-9-ylmethoxy)carbonyl]- MFCD00273473 FMOC-D-PHE(3,4-DI-CL)-OH FMOC-PHE(3,4-CL2)-OH FMOC-L-3,4-DICHLORO-PHE-OH FMOC-PHE(3,4-DI-CL)-OH (2R)-3-(3,4-Dichlorophenyl)-2-{[(9H-fluoren-9-ylmethoxy)carbonyl]amino}propanoic acid L-Phenylalanine, 3,4-dichloro-N-[(9H-fluoren-9-ylmethoxy)carbonyl]- FMOC-D-PHE(M,P-CL2)-OH (2S)-3-(3,4-Dichlorophenyl)-2-{[(9H-fluoren-9-ylmethoxy)carbonyl]amino}propanoic acid FMOC-L-3,4-DICHLOROPHE FMOC-L-3,4-Dichl FMOC-D-3,4-DICHLOROPHENYLALANINE Fmoc-L-phe(3,4-Cl2)-OH RARECHEM BK PT 0120 3,4-Dichloro-N-[(9H-fluoren-9-ylmethoxy)carbonyl]-L-phenylalanine Fmoc-D-Phe(3,4-Cl2)-OH 3,4-Dichloro-N-[(9H-fluoren-9-ylmethoxy)carbonyl]-D-phenylalanine FMOC-D-3,4-DICHLORO-PHE-OH FMOC-PHE(M,P-CL2)-OH FMOC-D-3,4-DICHLOROPHE FMOC-(3,4-DI-CL)-L-PHE-OH FMOC-(3,4-DI-CL)-D-PHE-OH Fmoc-Phe(3,4-DiCl)-OH |
密度 | 1.4±0.1 g/cm3 |
---|---|
沸点 | 661.7±55.0 °C at 760 mmHg |
熔点 | 122ºC |
分子式 | C24H19Cl2NO4 |
分子量 | 456.318 |
闪点 | 354.0±31.5 °C |
精确质量 | 455.069122 |
PSA | 75.63000 |
LogP | 6.47 |
蒸汽压 | 0.0±2.1 mmHg at 25°C |
折射率 | 1.642 |
储存条件 | 保存方法:2 -8 °C |
计算化学 | 1.疏水参数计算参考值(XlogP):5.9 2.氢键供体数量:2 3.氢键受体数量:4 4.可旋转化学键数量:7 5.互变异构体数量:2 6.拓扑分子极性表面积75.6 7.重原子数量:31 8.表面电荷:0 9.复杂度:625 10.同位素原子数量:0 11.确定原子立构中心数量:1 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
更多 | 1. 性状:未确定 2. 密度(g/mL25 ºC,):未确定 3. 相对蒸汽密度(g/mL,空气=1):未确定 4. 熔点(ºC):122 5. 沸点(ºC,常压):未确定 6. 沸点(ºC4 mmHg):未确定 7. 折射率:未确定 8. 闪点(ºF):未确定 9. 比旋光度(º):-30 10. 自燃点或引燃温度(ºC):未确定 11. 蒸气压(kPa,25ºC):未确定 12. 饱和蒸气压(kPa,60ºC):未确定 13. 燃烧热(KJ/mol):未确定 14. 临界温度(ºC):未确定 15. 临界压力(KPa):未确定 16. 油水(辛醇/水)分配系数的对数值:未确定 17. 爆炸上限(%,V/V):未确定 18. 爆炸下限(%,V/V):未确定 19. 溶解性:未确定 |
Material Safety Data Sheet
Section1. Identification of the substance Product Name: Fmoc-L-3,4-dichloroPhe-OH Synonyms:Fmoc-L-3,4-Dichlorophenylalanine Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section3. Composition/information on ingredients. Ingredient name:Fmoc-L-3,4-dichloroPhe-OH CAS number:177966-59-5 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels, refrigerated. Storage: Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Appearance:Not specified Boiling point:No data No data Melting point: Flash point:No data Density:No data Molecular formula:C24H19Cl2NO4 Molecular weight:456.3 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information Non-harzardous for air and ground transportation. Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A |
个人防护装备 | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
---|---|
危害码 (欧洲) | Xi: Irritant; |
安全声明 (欧洲) | S22-S24/25 |
危险品运输编码 | NONH for all modes of transport |
WGK德国 | 3 |