前往化源商城

1520-57-6

1520-57-6结构式
1520-57-6结构式

化源商城直购

中文名 乙酰氯-1-13C
英文名 acetyl chloride
英文别名 MFCD00000723
Acetyl chloride-1-13C
acetyl-carbonyl-13C chloride
密度 1.118 g/mL at 25ºC
沸点 52ºC(lit.)
熔点 -112ºC(lit.)
分子式 C2H3ClO
分子量 79.49030
闪点 40 °F
精确质量 78.99060
PSA 17.07000
LogP 0.77170
折射率 n20/D 1.389(lit.)
储存条件

常温, 避光,通风干燥处

稳定性

常温常压下稳定

计算化学

1.疏水参数计算参考值(XlogP):0.8

2.氢键供体数量:0

3.氢键受体数量:1

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积17.1

7.重原子数量:4

8.表面电荷:0

9.复杂度:33

10.同位素原子数量:1

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

更多

1. 性状:未确定

2. 密度(g/mL,15℃):1.118

3. 相对蒸汽密度(g/mL,空气=1):2.7

4. 熔点(ºC):-112

5. 沸点(ºC,常压):52

6. 折射率:1.389

7. 闪点(ºC):4

8. 自燃点或引燃温度(ºC):未确定

9. 比旋光度(º): 未确定

10. 蒸气压(kPa,25ºC):240 mm Hg ( 20 °C)

11. 饱和蒸气压(kPa,60ºC):未确定

12. 燃烧热(KJ/mol):未确定

13. 临界温度(ºC):未确定

14. 临界压力(KPa):未确定

15. 油水(辛醇/水)分配系数的对数值:未确定

16. 爆炸上限(%,V/V):未确定

17. 爆炸下限(%,V/V):未确定

溶解性:未确定

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Acetyl chloride-1-13C
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 1520-57-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 2), H225
Skin corrosion (Category 1B), H314
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
F Highly flammableR11
R14
C CorrosiveR34
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H225Highly flammable liquid and vapour.
H314Causes severe skin burns and eye damage.
Precautionary statement(s)
P210Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P280Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard information (EU)
EUH014Reacts violently with water.
Other hazards
Lachrymator.

SECTION 3: Composition/information on ingredients
Substances
Formula: 13CCH3ClO
Molecular Weight: 79,49 g/mol
CAS-No.: 1520-57-6
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Acetyl chloride-1-13C
CAS-No.1520-57-6Flam. Liq. 2; Acute Tox. 4;<= 100 %
Skin Corr. 1B; H225, H302,
H314, EUH014
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Acetyl chloride-1-13C
CAS-No.1520-57-6F, C, R11 - R14 - R34<= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Do not flush with water.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Never allow product to get in contact with water during storage.
Recommended storage temperature: 2 - 8 °C
Hydrolyses readily. Handle and store under inert gas.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Splash contact
Material: butyl-rubber
Minimum layer thickness: 0,3 mm
Break through time: 60 min
Material tested:Butoject® (KCL 897 / Z677647, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type
of protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: -112 °C - lit.
point
f) Initial boiling point and 52 °C - lit.
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density1,118 g/mL at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight. Exposure to moisture.
Incompatible materials
Strong acids, Incompatible with strong bases and oxidizing agents., Water, Alcohols
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, spasm, inflammation and edema of
the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, Material is
extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 1717IMDG: 1717IATA: 1717
UN proper shipping name
ADR/RID: ACETYL CHLORIDE
IMDG: ACETYL CHLORIDE
IATA:Acetyl chloride
Transport hazard class(es)
ADR/RID: 3 (8)IMDG: 3 (8)IATA: 3 (8)
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

通常对水是不危害的,若无政府许可,勿将材料排入周围环境

符号 GHS02 GHS05 GHS07
GHS02, GHS05, GHS07
信号词 Danger
危害声明 H225-H302-H314
补充危害声明 Reacts violently with water.
警示性声明 P210-P280-P305 + P351 + P338-P310
危害码 (欧洲) F: Flammable;C: Corrosive;
风险声明 (欧洲) R11
安全声明 (欧洲) 9-16-23-45
危险品运输编码 UN 1717 3/PG 2

~87%

1520-57-6结构式

1520-57-6

文献:Casey, Charles P.; Scheck, Daniel M. Journal of the American Chemical Society, 1980 , vol. 102, # 8 p. 2728 - 2731

~%

1520-57-6结构式

1520-57-6

文献:Knight, Frances I.; Brown, John M.; Lazzari, Dario; Ricci, Alfredo; Blacker, A. John Tetrahedron, 1997 , vol. 53, # 33 p. 11411 - 11424

~%

1520-57-6结构式

1520-57-6

文献:Banks; Digenis Tetrahedron Letters, 1989 , vol. 30, # 47 p. 6473 - 6476