84163-77-9

• 常用中文名：6-氟-3-(4-哌啶基)-1,2-苯异恶唑
• 常用英文名：6-Fluoro-3-(4-piperidinyl)-1,2-benzoxazole
• CAS号：84163-77-9
• 分子式：C₁₂H₁₃FN₂O
• 分子量：220.243
• 发布时间：2018-12-04 07:26:22
• 更新时间：2024-01-02 19:49:59
• 下载msds

名称

• 中文名: 6-氟-3-(哌啶-4-基)苯并[D]异恶唑
• 英文名: 6-Fluoro-3-(4-piperidinyl)-1,2-benzisoxazole
• 中文别名: 6-氟-3-(4-哌啶基)-1,2-苯异恶唑; 6-氟-3-(4-哌啶基)-1,2 苯并异唑; 6-氟-3-(4-哌啶基)-1,2苯并异唑; 6-氟-3-(4-哌啶基)-1,2苯併异噁唑; 6-氟-3-(4-哌啶基)-1,2苯并异噁唑; 利培酮杂质 M
• 英文别名: 6-fluoro-3-(piperidin-4-yl)-1,2-benzoxazole; MFCD06658529; 4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidine; 1,2-Benzisoxazole, 6-fluoro-3-(4-piperidinyl)-; 6-Fluoro-3-(4-piperidinyl)-1,2-benzoxazole; 6-Fluoro-3-(4-piperidinyl)-1,2-benzisoxazole; 6-fluoro-3-piperidin-4-yl-1,2-benzoxazole

物化性质

• 密度: 1.2±0.1 g/cm3
• 沸点: 359.0±42.0 °C at 760 mmHg
• 熔点: 59-62°C
• 分子式: C₁₂H₁₃FN₂O
• 分子量: 220.243
• 闪点: 170.9±27.9 °C
• 精确质量: 220.101196
• PSA: 38.06000
• LogP: 1.85
• 外观性状: 白色结晶粉末
• 蒸汽压: 0.0±0.8 mmHg at 25°C
• 折射率: 1.566
• 储存条件: -20°C Freezer
• 水溶解性: 可溶于：甲醇
• 计算化学:

  1.疏水参数计算参考值（XlogP）:2

  2.氢键供体数量:1

  3.氢键受体数量:4

  4.可旋转化学键数量:1

  5.互变异构体数量:无

  6.拓扑分子极性表面积38.1

  7.重原子数量:16

  8.表面电荷:0

  9.复杂度:245

  10.同位素原子数量:0

  11.确定原子立构中心数量:0

  12.不确定原子立构中心数量:0

  13.确定化学键立构中心数量:0

  14.不确定化学键立构中心数量:0

  15.共价键单元数量:1

MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name: 6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole : CDS003236 REACH No.: A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 3), H301 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC T ToxicR25 For the full text of the R-phrases mentioned in this Section, see Section 16. Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal wordDanger Hazard statement(s) Toxic if swallowed. Precautionary statement(s) P301 + P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. Supplemental Hazardnone Statements Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients Substances Molecular weight: 220,25 g/mol Hazardous ingredients according to Regulation (EC) No 1272/2008 ComponentClassificationConcentration 6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole Acute Tox. 3; H301<= 100 % Hazardous ingredients according to Directive 1999/45/EC ComponentClassificationConcentration 6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole T, R25<= 100 % For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 SECTION 4: First aid measures Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed No data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Nature of decomposition products not known. Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. Further information No data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Storage class (TRGS 510): Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) AppearanceForm: solid b) OdourNo data available c) Odour ThresholdNo data available d) pHNo data available e) Melting point/freezingNo data available point f) Initial boiling point and No data available boiling range g) Flash pointNo data available h) Evaporation rateNo data available i) Flammability (solid, gas) No data available j) Upper/lowerNo data available flammability or explosive limits k) Vapour pressureNo data available l) Vapour densityNo data available m) Relative densityNo data available n) Water solubilityNo data available o) Partition coefficient: n- No data available octanol/water p) Auto-ignitionNo data available temperature q) DecompositionNo data available temperature r) ViscosityNo data available s) Explosive propertiesNo data available t) Oxidizing propertiesNo data available Other safety information No data available SECTION 10: Stability and reactivity Reactivity No data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions No data available Conditions to avoid No data available Incompatible materials Strong oxidizing agents Hazardous decomposition products In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity No data available Skin corrosion/irritation No data available Serious eye damage/eye irritation No data available Respiratory or skin sensitisation No data available Germ cell mutagenicity No data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. SECTION 12: Ecological information Toxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Other adverse effects No data available SECTION 13: Disposal considerations Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: 2811IMDG: 2811IATA: 2811 UN proper shipping name ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole) IMDG: TOXIC SOLID, ORGANIC, N.O.S. (6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole) IATA:Toxic solid, organic, n.o.s. (6-Fluoro-3-(4-Piperidinyl)-1,2-Benzisoxazole) Transport hazard class(es) ADR/RID: 6.1IMDG: 6.1IATA: 6.1 Packaging group ADR/RID: IIIIMDG: IIIIATA: III Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user No data available SECTION 15: Regulatory information This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture No data available Chemical Safety Assessment SECTION 16 - ADDITIONAL INFORMATION N/A

安全

• 符号: GHS06
• 信号词: Danger
• 危害声明: H301
• 警示性声明: P301 + P310
• 危害码 (欧洲): Xi
• 风险声明 (欧洲): R36/37/38:Irritating to eyes, respiratory system and skin .
• 安全声明 (欧洲): S26-S36/37/39
• 危险品运输编码: UN 2811 6.1 / PGIII
• RTECS号: DL6425000
• 海关编码: 2934999090

合成路线

上下游产品

上游产品  10
135634-18-3 84162-86-7 84163-13-3 84162-80-1
498-94-2 84163-42-8 84163-43-9 84163-41-7
84162-94-7 59084-16-1
下游产品  5
1189516-65-1 144598-75-4 133454-47-4 130049-85-3
106266-06-2

海关

海关编码	2934999090
中文概述	2934999090. 其他杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素	品名, 成分含量, 用途
Summary	2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%