前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里


查看所有供应商和价格请点击:

216144-18-2生产厂家

216144-18-2价格

216144-18-2

216144-18-2结构式
216144-18-2结构式

化源商城直购

中文名 2-溴-4’-(1-吡咯烷基)苯乙酮
英文名 2-bromo-1-(4-pyrrolidin-1-ylphenyl)ethanone
中文别名 2-溴-1-(4-(吡咯啉-1-基)苯基)乙酮
α-溴-4-(1-吡咯烷)苯乙酮
ALPHA-溴-4-(1-吡咯烷基)乙酰苯酮
2-溴-4'-(1-吡咯烷基)苯乙酮
英文别名 MFCD01075690
密度 1.421g/cm3
沸点 386.6ºC at 760mmHg
熔点 120-122°C
分子式 C12H14BrNO
分子量 268.15000
闪点 187.6ºC
精确质量 267.02600
PSA 20.31000
LogP 2.92940
蒸汽压 3.51E-06mmHg at 25°C
折射率 1.596
储存条件

保存方法:密闭,阴凉,通风干燥处

稳定性

避氧化物、碱

计算化学

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:2

4.可旋转化学键数量:3

5.互变异构体数量:2

6.拓扑分子极性表面积20.3

7.重原子数量:15

8.表面电荷:0

9.复杂度:218

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

更多

1. 性状:黄色的晶体状粉末

2. 密度(g/mL25 ºC):未确定

3. 相对蒸汽密度(g/mL,空气=1)未确定

4. 熔点(ºC):120-122

5. 沸点(ºC,常压):未确定

6. 沸点(ºC3mmHg):未确定

7. 折射率:未确定

8. 闪点(º F):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,25ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:不能溶解于水的

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 2-Bromo-1-(4-(pyrrolidin-1-yl)phenyl)ethanone
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H314:Causes severe skin burns and eye damage
H318:Causes serious eye damage
P260:Do not breathe dust/fume/gas/mist/vapours/spray
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
P405:Store locked up

Section3. Composition/information on ingredients.
Ingredient name:2-Bromo-1-(4-(pyrrolidin-1-yl)phenyl)ethanone
CAS number:216144-18-2

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Not specified
Appearance:
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula:C12H14BrNO
Molecular weight:268.2

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen bromide.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
UN Number:UN3261 Class: 8 Packing group: III
Proper shipping name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (2-Bromo-1-(4-(pyrrolidin-1-yl)phenyl)ethanone)

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

1、其它有害作用:通常对水是不危害的,若无政府许可,勿将材料排入周围环境。

危害码 (欧洲) Xi: Irritant;
风险声明 (欧洲) R36/37/38
安全声明 (欧洲) S26-S36
海关编码 2933990090
上游产品  1

下游产品  1

海关编码 2933990090
中文概述 2933990090. 其他仅含氮杂原子的杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素 品名, 成分含量, 用途, 乌洛托品请注明外观, 6-己内酰胺请注明外观, 签约日期
Summary 2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%