1693-39-6

1693-39-6 structure
1693-39-6 structure
  • Name: 4-hydroxyphenylformamide
  • Chemical Name: N-(4-hydroxyphenyl)formamide
  • CAS Number: 1693-39-6
  • Molecular Formula: C7H7NO2
  • Molecular Weight: 137.13600
  • Create Date: 2018-03-02 08:00:00
  • Modify Date: 2024-01-11 18:51:30

Name N-(4-hydroxyphenyl)formamide
Synonyms 4-hydroxyformanilide
4-hydroxyphenylformamide
4-Formamidophenol
hydroxy-4 formanilide
4-formaminophenol
N-formyl-4-hydroxyaniline
Sorafenib Impurity 40
Density 1.31g/cm3
Boiling Point 374.9ºC at 760mmHg
Molecular Formula C7H7NO2
Molecular Weight 137.13600
Flash Point 180.6ºC
Exact Mass 137.04800
PSA 49.33000
LogP 1.66940
Vapour Pressure 3.74E-06mmHg at 25°C
Index of Refraction 1.644
Version 1.0
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product Name4'-HYDROXYFORMANILIDE - 1 GM

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
4'-HYDROXYFORMANILIDE1693-39-6 NoneNone
FormulaC7H7NO2
Molecular Weight 137,1400 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
ALDRICHwww.molbase.com
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Exercise appropriate precautions to minimize direct contact with
skin or eyes and prevent inhalation of dust.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection from nuisance levels of dusts are desired, use type N95
(US) or type P1 (EN 143) dust masks.
Hand Protection: Protective gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Solid
PropertyValueAt Temperature or Pressure
pHN/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
ALDRICHwww.molbase.com
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be harmful if inhaled.
Ingestion: May be harmful if swallowed.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

ALDRICHwww.molbase.com
RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2924299090

~10%

1693-39-6 structure

1693-39-6

Literature: Alinezhad, Heshmatollah; Salehian, Fatemeh Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 2013 , vol. 43, # 5 p. 532 - 538

~68%

1693-39-6 structure

1693-39-6

Literature: Azizi, Najmadin; Gholibeglo, Elham; Babapour, Mahbobe; Ghafuri, Hossein; Bolourtchian, Seyed Mohammad Comptes Rendus Chimie, 2012 , vol. 15, # 9 p. 768 - 773

~80%

1693-39-6 structure

1693-39-6

Literature: Vanjari, Rajeshwer; Allam, Bharat Kumar; Singh, Krishna Nand Tetrahedron Letters, 2013 , vol. 54, # 20 p. 2553 - 2555

~92%

1693-39-6 structure

1693-39-6

Literature: Wang, Zhao-Gang; Lu, Ming RSC Advances, 2014 , vol. 4, # 3 p. 1234 - 1240

~90%

1693-39-6 structure

1693-39-6

Literature: Braune, Sascha; Kazmaier, Uli Journal of Organometallic Chemistry, 2002 , vol. 641, # 1-2 p. 26 - 29

~74%

1693-39-6 structure

1693-39-6

Literature: Kamal, Ahmed; Srinivasa Reddy; Rajendra Prasad; Hari Babu; Ramana, A. Venkata Tetrahedron Letters, 2004 , vol. 45, # 34 p. 6517 - 6521

~79%

1693-39-6 structure

1693-39-6

Literature: Kamal, Ahmed; Ramana, A. Venkata; Reddy, K. Srinivasa; Ramana, K. Venkata; Hari Babu; Prasad, B. Rajendra Tetrahedron Letters, 2004 , vol. 45, # 44 p. 8187 - 8190

~36%

1693-39-6 structure

1693-39-6

Literature: Berrier, Christian; Jacquesy, Jean-Claude; Jouannetaud, Marie-Paule; Morellet, Guy Bulletin de la Societe Chimique de France, 1987 , # 1 p. 158 - 164

~%

1693-39-6 structure

1693-39-6

Literature: Passerini; Banti Gazzetta Chimica Italiana, 1928 , vol. 58, p. 638
HS Code 2924299090
Summary 2924299090. other cyclic amides (including cyclic carbamates) and their derivatives; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%