Top Suppliers:I want be here


6053-68-5

6053-68-5 structure
6053-68-5 structure

Name 1,2,3,4-Cyclopentanetetracarboxylic Dianhydride
Synonyms 1,2,3,4-Cyclopentanetetracarboxylic Dianhydride
1H-Cyclopenta[1,2-c:3,4-c']difuran-1,3,4,6(3aH)-tetrone, tetrahydro-
EINECS 227-964-7
MFCD00046872
1H-Cyclopenta(1,2-c:3,4-c')difuran-1,3,4,6(3aH)-tetrone, tetrahydro-
Tetrahydro-1H-furo[3',4':3,4]cyclopenta[1,2-c]furan-1,3,4,6(3aH)-tetrone
Density 1.7±0.1 g/cm3
Boiling Point 526.7±50.0 °C at 760 mmHg
Melting Point 213 °C
Molecular Formula C9H6O6
Molecular Weight 210.140
Flash Point 244.0±30.2 °C
Exact Mass 210.016434
PSA 86.74000
LogP -2.10
Vapour Pressure 0.0±1.4 mmHg at 25°C
Index of Refraction 1.574

Section I.Chemical Product and Company Identification
Chemical Name 1,2,3,4-Cyclopentanetetracarboxylic Dianhydride
Portland OR
Synonym1H-Cyclopenta[1,2-c:3,4-c']difuran-1,3,4,6(3aH)-tetrone,
tetrahydro- (CA INDEX)
C9H6O6
Chemical Formula
CAS Number6053-68-5

Section II.Composition and Information on Ingredients
Toxicology Data
Chemical NameCAS Number Percent (%)TLV/PEL
Min. 98.0 (T) Not available.Not available.
1,2,3,4-Cyclopentanetetracarboxylic Dianhydride6053-68-5

Section III. Hazards Identification
Acute Health EffectsIrritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when handling
this compound.
Chronic Health EffectsCARCINOGENIC EFFECTS : Not available.
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.First Aid Measures
Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention.
Skin ContactIn case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing
before reuse. Thoroughly clean shoes before reuse. Get medical attention.
If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
Inhalation
waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
improve.
INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
Ingestion
Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
material was ingested; the absence of such signs, however, is not conclusive.

Section V.Fire and Explosion Data
Not available.
May be combustible at high temperature.Auto-Ignition
Flammability
Flash PointsFlammable LimitsNot available.
Not available.
These products are toxic carbon oxides (CO, CO2).
Combustion Products
Fire HazardsNot available.
Risks of explosion of the product in presence of mechanical impact: Not available.
Explosion Hazards
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
and Instructions
Consult with local fire authorities before attempting large scale fire-fighting operations.
Continued on Next Page
1,2,3,4-Cyclopentanetetracarboxylic Dianhydride

Section VI.Accidental Release Measures
Spill CleanupIrritating material.
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any
Instructions
contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for assistance on
disposal.

Section VII. Handling and Storage
IRRITANT. Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a
Handling and Storage
dry, cool place. Avoid excessive heat and light. Do not breathe dust.
Information
Always store away from incompatible compounds such as oxidizing agents, moisture.

Section VIII. Exposure Controls/Personal Protection
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
Engineering Controls
exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
Splash goggles. Lab coat. Dust respirator. Gloves. Suggested protective clothing might not be sufficient; consult a specialist
Personal Protection
BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
Exposure LimitsNot available.

Section IX. Physical and Chemical Properties
Solid. (White crystal~crystalline powder)Solubility
Physical state @ 20°CSoluble in: Acetone.
Not available.
Specific Gravity
Molecular Weight210.14Partition Coefficient
Not available.
Boiling PointNot available.Vapor PressureNot applicable.
226°C (438.8°F)Not available.
Melting PointVapor Density
Refractive IndexNot available.VolatilityNot available.
Not available.Not available.
Critical TemperatureOdor
ViscosityNot available.TasteNot available.

Section X.Stability and Reactivity Data

This material is stable if stored under proper conditions. (See Section VII for instructions)
Stability
Conditions of InstabilityAvoid excessive heat and light.
Incompatibilities
Reactive with oxidizing agents, moisture.

Section XI. Toxicological Information
Not available.
RTECS Number
Eye Contact. Ingestion. Inhalation.
Routes of Exposure
Not available.
Toxicity Data
Chronic Toxic EffectsCARCINOGENIC EFFECTS : Not available.
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the eye
Acute Toxic Effects
is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or,
occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when handling
this compound.

Section XII.Ecological Information
EcotoxicityNot available.
Environmental FateNot available.
Continued on Next Page
1,2,3,4-Cyclopentanetetracarboxylic Dianhydride

Section XIII. Disposal Considerations
Waste DisposalRecycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
Not a DOT controlled material (United States).
DOT Classification
PIN NumberNot applicable.
Proper Shipping NameNot applicable.
Packing Group (PG)Not applicable.
DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
TSCA Chemical InventoryThis compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list.
(EPA)
WHMIS ClassificationOn NDSL.
(Canada)
EINECS Number (EEC) 227-964-7
EEC Risk StatementsR36/37/38- Irritating to eyes, respiratory system and skin.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes Xi
Risk Phrases R36/37
Safety Phrases S25
HS Code 2932190090
HS Code 2932190090
Summary 2932190090 other compounds containing an unfused furan ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0%