Name | 4-Fluoro-3-methoxycarbonylphenylboronic acid |
---|---|
Synonyms |
Benzoic acid, 4-borono-2-fluoro-, methyl ester
(4-fluoro-3-methoxycarbonylphenyl)boronic acid Benzoic acid, 5-borono-2-fluoro-, methyl ester [4-Fluoro-3-(methoxycarbonyl)phenyl]boronic acid MFCD06801688 [3-Fluoro-4-(methoxycarbonyl)phenyl]boronic acid |
Density | 1.3±0.1 g/cm3 |
---|---|
Boiling Point | 364.8±52.0 °C at 760 mmHg |
Melting Point | 253-255ºC |
Molecular Formula | C8H8BFO4 |
Molecular Weight | 197.956 |
Flash Point | 174.4±30.7 °C |
Exact Mass | 198.049973 |
PSA | 66.76000 |
LogP | 1.32 |
Vapour Pressure | 0.0±0.9 mmHg at 25°C |
Index of Refraction | 1.514 |
Storage condition | Keep Cold |
4-Fluoro-3-(methoxycarbonyl)phenylboronic Acid
(contains varying amounts of Anhydride) SAFETY DATA SHEET Section1. IDENTIFICATION Product name:4-Fluoro-3-(methoxycarbonyl)phenylboronic Acid (contains varying amounts of Anhydride) 5.3
Section2. HAZARDS IDENTIFICATION GHS classification Not classified PHYSICAL HAZARDS HEALTH HAZARDS Category 2 Skin corrosion/irritation Serious eye damage/eye irritationCategory 2A ENVIRONMENTAL HAZARDSNot classified GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordWarning Causes skin irritation Hazard statements Causes serious eye irritation Precautionary statements: [Prevention]Wash hands thoroughly after handling. Wear protective gloves/eye protection/face protection. [Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Gently wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance Substance/mixture: Components:4-Fluoro-3-(methoxycarbonyl)phenylboronic Acid (contains varying amounts of Anhydride) Percent:.... 874219-35-9 CAS Number: Synonyms:4-Fluoro-3-(methoxycarbonyl)benzeneboronic Acid (contains varying amounts of Anhydride) Chemical Formula:C8H8BFO4 Acid (contains varying amounts of Anhydride) Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak. protective equipment and Entry to non-involved personnel should be controlled around the leakage area by emergency procedures: roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a cool and dark place. Store away from incompatible materials such as oxidizing agents. Comply with laws. Packaging material: Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust as possible so that workers should not be exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator. Follow local and national regulations. Hand protection:Protective gloves. Safety glasses. A face-shield, if the situation requires. Eye protection: Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Solid Acid (contains varying amounts of Anhydride) Section9. PHYSICAL AND CHEMICAL PROPERTIES Form:Crystal- Powder Colour:White - Almost white Odour:No data available pH: No data available Melting point/freezing point:255°C Boiling point/range:No data available Flash point:No data available Flammability or explosive limits: Lower:No data available Upper:No data available Relative density:No data available Solubility(ies): [Water]No data available [Other solvents] Soluble:Methanol Section10. STABILITY AND REACTIVITY Stable under proper conditions. Chemical stability: Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Boron oxides , Hydrogen fluoride products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available No data available Crustacea: Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil No data available Log Pow: Soil adsorption (Koc):No data available No data available Henry's Law constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Acid (contains varying amounts of Anhydride) Section14. TRANSPORT INFORMATION Hazards Class:Does not correspond to the classification standard of the United Nations UN-No:Not listed Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | Xi: Irritant; |
---|---|
Risk Phrases | 36/37/38 |
Safety Phrases | 26-36/37/39 |
HS Code | 2931900090 |
~98% 874219-35-9 |
Literature: BIOLIPOX AB; NILSSON, Peter; PELCMAN, Benjamin; KATKEVICS, Martins Patent: WO2010/103278 A1, 2010 ; Location in patent: Page/Page column 111 ; |
Precursor 2 | |
---|---|
DownStream 0 |
HS Code | 2931900090 |
---|---|
Summary | 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0% |