1740-54-1

1740-54-1 structure
1740-54-1 structure
  • Name: decanediamide
  • Chemical Name: decanediamide
  • CAS Number: 1740-54-1
  • Molecular Formula: C10H20N2O2
  • Molecular Weight: 200.27800
  • Create Date: 2018-02-21 08:00:00
  • Modify Date: 2024-01-04 11:28:37

Name decanediamide
Synonyms octane-1,8-dicarboxamide
decanedioic acid amide
Decandiamid
Sebacinsaeurediamid
Sebacamide
Sebacinamid
Density 1.026g/cm3
Boiling Point 472ºC at 760mmHg
Molecular Formula C10H20N2O2
Molecular Weight 200.27800
Flash Point 239.3ºC
Exact Mass 200.15200
PSA 86.18000
LogP 2.47840
Vapour Pressure 4.43E-09mmHg at 25°C
Index of Refraction 1.48
Version 1.2
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameSEBACAMIDE, TECH., 85%

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Irritating to eyes, respiratory system and skin.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
SEBACAMIDE, TECH., 85%1740-54-1 217-103-3 None
FormulaC10H20N2O2
Molecular Weight 200,2800 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
ALDRICHwww.molbase.com
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe dust. Avoid contact
with eyes, skin, and clothing.
STORAGE
Conditions of Storage: Keep tightly closed. Store in a cool dry
place.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a dust mask type N95 (US) or type P1 (EN 143)
respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

pH N/A
BP/BP RangeN/A
MP/MP Range199,000. - 202,000 °
C.
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
ALDRICHwww.molbase.com
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides.

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Inhalation: Material is irritating to mucous membranes and upper
respiratory tract.
Multiple Routes: Causes eye and skin irritation. May be harmful
by inhalation, ingestion, or skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental
regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information
ALDRICHwww.molbase.com

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
INDICATION OF DANGER: Xi
Irritant.
R-PHRASES: 36/37/38
Irritating to eyes, respiratory system and skin.
S-PHRASES: 26-37/39
In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice. Wear suitable gloves and
eye/face protection.
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2924199090
HS Code 2924199090
Summary 2924199090. other acyclic amides (including acyclic carbamates) and their derivatives; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%