Name | bis(cyclopentadienyl)molybdenum dichloride |
---|---|
Synonyms |
Bis(cyclopentadienyl)molybdenium(IV) dichloride
Bis(cyclopentadienyl)molybdenumdichloride Bis(cyclopentadienyl)molybdenum dichloride MFCD00009948 BIS(CYCLOPENTADIENYL)MOLYBDENUM(IV) DICHLORIDE Dicyclopentadienylmolybdenium dichloride MOLYBDOCENE DICHLORIDE |
Boiling Point | 41.5ºC at 760mmHg |
---|---|
Molecular Formula | C10H10Cl2Mo |
Molecular Weight | 297.05200 |
Exact Mass | 297.92100 |
LogP | 3.42200 |
Vapour Pressure | 418mmHg at 25°C |
Water Solubility | Insoluble in water. |
Synonym:Bis(Cyclopentadienyl)molybdenum Dichloride Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated.Air sensitive.Moisture sensitive. Potential Health Effects Eye: Causes eye irritation. May cause chemical conjunctivitis. Skin: Causes skin irritation. Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Inhalation: Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema. Chronic: Effects may be delayed. Section 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use agent most appropriate to extinguish fire. Do NOT get water inside containers. Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Place under an inert atmosphere. Do not get water inside containers. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Keep from contact with moist air and steam. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture. Store under an inert atmosphere. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 12184-22-4: United States OSHA: 15 mg/m3 TWA (total dust) (listed under Molybdenum). Malaysia: (listed as molybdenum): 10 mg/m3 TWA Netherlands: (listed as molybdenum): 5 mg/m3 MAC Russia: (listed as molybdenum): 3 mg/m3 TWA Russia: (listed as molybdenum): 0.5 mg/m3 STEL Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Crystals Color: black - brown - gray powder Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: Not available. Autoignition Temperature: Not applicable. Flash Point: Not applicable. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C10H10Cl2Mo Molecular Weight: 297.02 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions. Conditions to Avoid: Incompatible materials, dust generation, moisture, exposure to air, excess heat, strong oxidants. Incompatibilities with Other Materials: Air, moisture, strong oxidizing agents. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, oxides of chlorine. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 12184-22-4 unlisted. LD50/LC50: Not available. Carcinogenicity: Molybdocene Dichloride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 37/39 Wear suitable gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 12184-22-4: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 12184-22-4 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 12184-22-4 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Symbol |
GHS07 |
---|---|
Signal Word | Warning |
Hazard Statements | H315-H319-H335 |
Precautionary Statements | P261-P305 + P351 + P338 |
Personal Protective Equipment | dust mask type N95 (US);Eyeshields;Gloves |
Hazard Codes | Xi:Irritant; |
Risk Phrases | R36/37/38 |
Safety Phrases | S26-S37/39 |
RIDADR | UN3261 |
Packaging Group | III |
~44% 12184-22-4 |
Literature: Journal of the Chemical Society, Chemical Communications, , # 1 p. 30 - 31 |
~% 12184-22-4 |
Literature: Journal of the Chemical Society, Dalton Transactions: Inorganic Chemistry (1972-1999), , p. 2495 - 2498 |
~% 12184-22-4 |
Literature: Inorganica Chimica Acta, , vol. 104, p. 185 - 190 |
Precursor 3 | |
---|---|
DownStream 0 |