10102-71-3

10102-71-3 structure
10102-71-3 structure

Name aluminum,sodium,disulfate
Synonyms UNII-0CM6A697VV
Aluminum sodium disulfate
EINECS 233-277-3
Sodium aluminium sulfate
Density 1.610
Boiling Point 330ºC at 760mmHg
Melting Point ~60℃ [MER06]
Molecular Formula AlH3NaO8S2
Molecular Weight 245.12000
Exact Mass 244.89800
PSA 177.28000
Vapour Pressure 3.35E-05mmHg at 25°C
Water Solubility g anhydrous/100 g H2O: 37.4 (0°C), 39.7 (20°C), 43.8 (40°C) [LAN05]; insoluble alcohol [MER06]

Section 1. Chemical Product and Company Identification
Aluminum sodium sulfateCatalog
Common Name/
Number(s).
Trade Name
CAS#10102-71-3
Manufacturer
RTECSNot available.
SPECTRUM QUALITY PRODUCTS INC.
TSCATSCA 8(b) inventory:
Aluminum sodium sulfate
Commercial Name(s)Not available.
CI# Not applicable.
SynonymSoda alum
IN CASE OF EMERGENCY
Aluminum sodium sulfate
Chemical Name
Chemical FamilyMetal salt. (Salt.)CALL (310) 516-8000
AlNa(SO4)2.12H2O
Chemical Formula
SPECTRUM QUALITY PRODUCTS INC.

Section 2.Composition and Information on Ingredients
Exposure Limits
TWA (mg/m3)STEL (mg/m3) CEIL (mg/m3)
NameCAS #% by Weight
1) Aluminum sodium sulfate10102-71-3100
Toxicological DataAluminum sodium sulfate
on IngredientsLD50: Not available.
LC50: Not available.

Section 3. Hazards Identification
Potential Acute Health Effects Hazardous in case of skin contact (irritant), of eye contact (irritant). Slightly hazardous in case of skin contact
(sensitizer), of ingestion, of inhalation.
Potential Chronic HealthCARCINOGENIC EFFECTS: Not available.
EffectsMUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
The substance is toxic to lungs, mucous membranes.
Repeated or prolonged exposure to the substance can produce target organs damage.
Aluminum sodium sulfate

Section 4. First Aid Measures
Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. Cold water may be used. Get medical attention.
Skin ContactIn case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove
contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes
before reuse. Get medical attention.
Serious Skin ContactWash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical
attention.
InhalationIf inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
medical attention.
Serious InhalationNot available.
IngestionDo NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight
clothing such as a collar, tie, belt or waistband.
Serious IngestionNot available.

Section 5. Fire and Explosion Data
Flammability of the Product Non-flammable.
Auto-Ignition Temperature Not applicable.
Flash PointsNot applicable.
Flammable LimitsNot applicable.
Products of CombustionNot available.
Fire Hazards in Presence of Not applicable.
Various Substances
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
of Various SubstancesRisks of explosion of the product in presence of static discharge: Not available.
Fire Fighting MediaNot applicable.
and Instructions
Special Remarks onWhen heated to decomposition it emits toxic fumes.
Fire Hazards
Special Remarks on Explosion Not available.
Hazards

Section 6. Accidental Release Measures
Small SpillUse appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and dispose of according to local and regional authority
requirements.
Large SpillUse a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
on the contaminated surface and allow to evacuate through the sanitary system.
Aluminum sodium sulfate

Section 7. Handling and Storage
PrecautionsDo not breathe dust. Wear suitable protective clothing. If you feel unwell, seek medical attention and show the
label when possible. Avoid contact with skin and eyes.
StorageKeep container tightly closed. Keep container in a cool, well-ventilated area.

Section 8. Exposure Controls/Personal Protection
Engineering ControlsUse process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal Protection
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Gloves.
Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
a Large Spillto avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
Exposure LimitsNot available.

Section 9. Physical and Chemical Properties
Physical state and appearance Solid. (Crystals solid.)OdorNot available.
TasteAstringent. Saline.
Molecular Weight458.29 g/mole
ColorColorless.
pH (1% soln/water)7 [Neutral.]
Boiling PointDecomposes.
Melting Point61°C (141.8°F)
Critical TemperatureNot available.
1.67 (Water = 1)
Specific Gravity
Vapor PressureNot applicable.
Vapor DensityNot available.
VolatilityNot available.
Odor ThresholdNot available.
Not available.
Water/Oil Dist. Coeff.
Ionicity (in Water)Not available.
See solubility in water.
Dispersion Properties
SolubilitySoluble in cold water, hot water.
Insoluble in methanol.

Section 10. Stability and Reactivity Data
StabilityThe product is stable.
Instability TemperatureNot available.
Conditions of InstabilityNot available.
Incompatibility with variousNot available.
substances
CorrosivityNon-corrosive in presence of glass.
Aluminum sodium sulfate
Not available.
Special Remarks on
Reactivity
Not available.
Special Remarks on
Corrosivity
PolymerizationWill not occur.

Section 11. Toxicological Information
Routes of EntryEye contact.
Toxicity to AnimalsLD50: Not available.
LC50: Not available.
Chronic Effects on Humans Causes damage to the following organs: lungs, mucous membranes.
Other Toxic Effects on
Hazardous in case of skin contact (irritant).
HumansSlightly hazardous in case of skin contact (sensitizer), of ingestion, of inhalation.
Special Remarks on
Not available.
Toxicity to Animals
Special Remarks onNot available.
Chronic Effects on Humans
Special Remarks on otherNot available.
Toxic Effects on Humans

Section 12. Ecological Information
EcotoxicityNot available.
Not available.
BOD5 and COD
Possibly hazardous short term degradation products are not likely. However, long term degradation products may
Products of Biodegradation
arise.
Toxicity of the ProductsThe products of degradation are more toxic.
of Biodegradation
Special Remarks on theNot available.
Products of Biodegradation

Section 13. Disposal Considerations
Waste Disposal

Section 14. Transport Information
DOT ClassificationNot a DOT controlled material (United States).
IdentificationNot applicable.
Not applicable.
Special Provisions for
Transport
DOT (Pictograms)
Aluminum sodium sulfate

Section 15. Other Regulatory Information and Pictograms
TSCA 8(b) inventory: Aluminum sodium sulfate
Federal and State
Regulations
California
Proposition 65
Warnings
Other RegulationsOSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
WHMIS (Canada) CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
Other Classifications
DSCL (EEC)R36/38- Irritating to eyes and skin.
Health Hazard
HMIS (U.S.A.)2 National Fire Protection
0 Flammability
0 Association (U.S.A.)
Fire Hazard
2 0 Reactivity
Health
Reactivity
0
Specific hazard
Personal Protection
E
WHMIS (Canada)
(Pictograms)
DSCL (Europe)
(Pictograms)
TDG (Canada)
(Pictograms)
ADR (Europe)
(Pictograms)
Protective Equipment
Gloves.
Lab coat.
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent. Wear appropriate respirator
when ventilation is inadequate.
Splash goggles.


SECTION 16 - ADDITIONAL INFORMATION
N/A