Benzene,1-methoxy-4-(2-phenylethenyl)-

Modify Date: 2024-01-12 18:05:13

Benzene,1-methoxy-4-(2-phenylethenyl)- Structure
Benzene,1-methoxy-4-(2-phenylethenyl)- structure
Common Name Benzene,1-methoxy-4-(2-phenylethenyl)-
CAS Number 1142-15-0 Molecular Weight 210.27100
Density 1.069g/cm3 Boiling Point 341.5ºC at 760 mmHg
Molecular Formula C15H14O Melting Point 135-138 °C
MSDS N/A Flash Point 135.4ºC

 Names

Name 4-methoxystilbene
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.069g/cm3
Boiling Point 341.5ºC at 760 mmHg
Melting Point 135-138 °C
Molecular Formula C15H14O
Molecular Weight 210.27100
Flash Point 135.4ºC
Exact Mass 210.10400
PSA 9.23000
LogP 3.86560
Vapour Pressure 0.000159mmHg at 25°C
Index of Refraction 1.634

 MSDS

Name: 4-Methoxystilbene 98+% Material Safety Data Sheet
Synonym: None Known
CAS: 1142-15-0
Section 1 - Chemical Product MSDS Name:4-Methoxystilbene 98+% Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1142-15-0 4-Methoxystilbene 98+ 214-530-7
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 1142-15-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Powder
Color: light yellow to green
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 136.00 - 138.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C15H14O
Molecular Weight: 210.27

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1142-15-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Methoxystilbene - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1142-15-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1142-15-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1142-15-0 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
Risk Phrases R36
Safety Phrases S39-S26

 Synonyms

4-Methoxy-trans-stilbene
MFCD00017178
4-Methoxy-cis-stilbene
1-Styryl-4-methoxybenzene
p-Methoxystilbene
4-methoxy-trans-stilbene radical-cation
trans-4-methoxystilbene radical cation
Methoxystilbene,4
Anisole,p-styryl-(6CI,7CI,8CI)
Anisole,p-styryl
4-Methoxystilbene
EINECS 214-530-7
Top Suppliers:I want be here


Get all suppliers and price by the below link:

Benzene,1-methoxy-4-(2-phenylethenyl)- suppliers

Benzene,1-methoxy-4-(2-phenylethenyl)- price