7-Methyltryptophan

Modify Date: 2024-01-05 19:44:12

7-Methyltryptophan Structure
7-Methyltryptophan structure
Common Name 7-Methyltryptophan
CAS Number 17332-70-6 Molecular Weight 218.252
Density 1.3±0.1 g/cm3 Boiling Point 448.8±45.0 °C at 760 mmHg
Molecular Formula C12H14N2O2 Melting Point N/A
MSDS Chinese USA Flash Point 225.3±28.7 °C

 Use of 7-Methyltryptophan


7-Methyl-DL-tryptophan (7-Methyltryptophan) is an amino acid derivative, which is a key precursor for biosynthesis of many non-ribosomal peptide antibiotics. 7-Methyl-DL-tryptophan plays an important role in synthesis of high-efficiency antibacterial agents and analogues thereof[1].

 Names

Name 2-amino-3-(7-methyl-1H-indol-3-yl)propanoic acid
Synonym More Synonyms

 7-Methyltryptophan Biological Activity

Description 7-Methyl-DL-tryptophan (7-Methyltryptophan) is an amino acid derivative, which is a key precursor for biosynthesis of many non-ribosomal peptide antibiotics. 7-Methyl-DL-tryptophan plays an important role in synthesis of high-efficiency antibacterial agents and analogues thereof[1].
Related Catalog
References

[1]. Jun XY, et, al. Synthesis method of 7-methyltryptophan. CN112062705A.

 Chemical & Physical Properties

Density 1.3±0.1 g/cm3
Boiling Point 448.8±45.0 °C at 760 mmHg
Molecular Formula C12H14N2O2
Molecular Weight 218.252
Flash Point 225.3±28.7 °C
Exact Mass 218.105530
PSA 79.11000
LogP 1.50
Appearance of Characters crystalline | off-white
Vapour Pressure 0.0±1.1 mmHg at 25°C
Index of Refraction 1.677
Storage condition 2-8°C

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 7-Methyl-dl-tryptophan
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

Section3. Composition/information on ingredients.
Ingredient name:7-Methyl-dl-tryptophan
CAS number:17332-70-6

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels, refrigerated.
Storage:

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C12H14N2O2
Molecular weight:218.3

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
RIDADR NONH for all modes of transport
WGK Germany 3

 Articles1

More Articles
Use of 4-methylindole or 7-methyl-DL-tryptophan in a transformant selection system based on the feedback-insensitive anthranilate synthase alpha-subunit of tobacco (ASA2).

Plant Cell Rep. 27 , 509-517, (2008)

Effective selectable markers are needed for basic research and commercial applications that do not involve antibiotic or herbicide resistance. A novel selection system based on a feedback-insensitive ...

 Synonyms

7-Methyl-tryptophan
7-Methyltryptophan
MFCD00056926
7-methyl-D,L-tryptophan
Tryptophan, 7-methyl-
7-CH3-D,L-Trp
Top Suppliers:I want be here


Get all suppliers and price by the below link:

7-Methyltryptophan suppliers

7-Methyltryptophan price