BCTC
Modify Date: 2024-01-08 19:26:39
BCTC structure
|
Common Name | BCTC | ||
|---|---|---|---|---|
| CAS Number | 393514-24-4 | Molecular Weight | 372.892 | |
| Density | 1.2±0.1 g/cm3 | Boiling Point | 561.6±50.0 °C at 760 mmHg | |
| Molecular Formula | C20H25ClN4O | Melting Point | N/A | |
| MSDS | Chinese USA | Flash Point | 293.4±30.1 °C | |
| Symbol |
GHS07 |
Signal Word | Warning | |
Use of BCTCBCTC is a potent and specific inhibitor of transient receptor potential cation channel subfamily M member 8 (TRPM8) in prostate cancer (PCa) DU145 cells.Target: TRPM8in vitro: BCTC is a potent and specific antagonist of TRPM8, exerts an anti-tumor effect on the androgen-independent PCa DU145 cells, and the mechanism of how the inhibition functions. BCTC exerts an anti-proliferative effect on DU145 cells and induces tumor suppression through G0/G1 cell cycle arrest, and inhibition of migration and invasion. BCTC demonstrates excellent anti-tumor activity in PCa DU145 cells, and therefore has the potential to become a targeted therapeutic strategy against PCa. [1]in vivo: BCTC is a potent, selective, and orally bioavailable antagonist of rat VR1. BCTC not only blocks the activation of rat VR1 by capsaicin but also by low pH at the native rat VR1 in a skin-nerve preparation. Thus, BCTC has provided us with an opportunity to test our hypothesis that the inhibition of low pH induced activation of VR1 confers in vivo efficacy in models of chronic pain. This report describes the effects of BCTC in models of inflammatory, neuropathic, and capsaicin-induced pain in the rat. The efficacy and side effect profile of BCTC in these models were compared with those of nonsteroidal anti-inflammatory drugs and antiepileptic drugs currently used for the clinical therapy of inflammatory and neuropathic pain, respectively.[2] |
| Name | N-(4-tert-butylphenyl)-4-(3-chloropyridin-2-yl)piperazine-1-carboxamide |
|---|---|
| Synonym | More Synonyms |
| Description | BCTC is a potent and specific inhibitor of transient receptor potential cation channel subfamily M member 8 (TRPM8) in prostate cancer (PCa) DU145 cells.Target: TRPM8in vitro: BCTC is a potent and specific antagonist of TRPM8, exerts an anti-tumor effect on the androgen-independent PCa DU145 cells, and the mechanism of how the inhibition functions. BCTC exerts an anti-proliferative effect on DU145 cells and induces tumor suppression through G0/G1 cell cycle arrest, and inhibition of migration and invasion. BCTC demonstrates excellent anti-tumor activity in PCa DU145 cells, and therefore has the potential to become a targeted therapeutic strategy against PCa. [1]in vivo: BCTC is a potent, selective, and orally bioavailable antagonist of rat VR1. BCTC not only blocks the activation of rat VR1 by capsaicin but also by low pH at the native rat VR1 in a skin-nerve preparation. Thus, BCTC has provided us with an opportunity to test our hypothesis that the inhibition of low pH induced activation of VR1 confers in vivo efficacy in models of chronic pain. This report describes the effects of BCTC in models of inflammatory, neuropathic, and capsaicin-induced pain in the rat. The efficacy and side effect profile of BCTC in these models were compared with those of nonsteroidal anti-inflammatory drugs and antiepileptic drugs currently used for the clinical therapy of inflammatory and neuropathic pain, respectively.[2] |
|---|---|
| Related Catalog | |
| References |
| Density | 1.2±0.1 g/cm3 |
|---|---|
| Boiling Point | 561.6±50.0 °C at 760 mmHg |
| Molecular Formula | C20H25ClN4O |
| Molecular Weight | 372.892 |
| Flash Point | 293.4±30.1 °C |
| Exact Mass | 372.171692 |
| PSA | 48.47000 |
| LogP | 4.08 |
| Vapour Pressure | 0.0±1.5 mmHg at 25°C |
| Index of Refraction | 1.610 |
| Storage condition | 2-8℃ |
|
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name: BCTC CAS-No.: 393514-24-4 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Acute toxicity, Oral (Category 4) Classification according to EU Directives 67/548/EEC or 1999/45/EC Harmful if swallowed. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal wordWarning Hazard statement(s) H302Harmful if swallowed. Precautionary statement(s) none Supplemental Hazardnone Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R22Harmful if swallowed. S-phrase(s)none Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms: 4-(3-Chloro-2-pyridinyl)-N-[4-(1,1-dimethylethyl)phenyl]-1- piperazinecarboxamide Formula: C20H25ClN4O Molecular Weight: 372,89 g/mol ComponentConcentration 4-(3-Chloro-2-pyridinyl)-N-[4-(1,1-dimethylethyl)phenyl]-1-piperazinecarboxamide CAS-No.393514-24-4- Section4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed analgesic activity, To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Specific end uses no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: solid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and no data available boiling range g) Flash pointno data available h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- log Pow: 3,567 octanol/water p) Autoignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. May cause respiratory tract irritation. IngestionHarmful if swallowed. Skin May be harmful if absorbed through skin. May cause skin irritation. EyesMay cause eye irritation. Signs and Symptoms of Exposure analgesic activity, To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects no data available Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: -IMDG: -IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA:Not dangerous goods Transport hazard class(es) ADR/RID: -IMDG: -IATA: - Packaging group ADR/RID: -IMDG: -IATA: - Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
|
Polysulfide evokes acute pain through the activation of nociceptive TRPA1 in mouse sensory neurons.
Mol. Pain 11 , 24, (2015) Hydrogen sulfide (H2S) is oxidized to polysulfide. Recent reports show that this sulfur compound modulates various biological functions. We have reported that H2S is involved in inflammatory pain in m... |
|
|
Agonist-dependent modulation of cell surface expression of the cold receptor TRPM8.
J. Neurosci. 35(2) , 571-82, (2015) The spatial and temporal distribution of receptors constitutes an important mechanism for controlling the magnitude of cellular responses. Several members of the transient receptor potential (TRP) ion... |
|
|
Temperature oscillations drive cycles in the activity of MMP-2,9 secreted by a human trabecular meshwork cell line.
Invest. Ophthalmol. Vis. Sci. 56(2) , 1396-405, (2015) Aqueous humor inflow falls 50% during sleeping hours without proportional fall in IOP, partly reflecting reduced outflow facility. The mechanisms underlying outflow facility cycling are unknown. One o... |
| N-(4-tert-butylphenyl)-4-(3-chloropyridin-2-yl)piperazine-1-carboxamide |
| 1-Piperazinecarboxamide, 4-(3-chloro-2-pyridinyl)-N-[4-(1,1-dimethylethyl)phenyl]- |
| 4-(3-Chloro-2-pyridinyl)-N-[4-(2-methyl-2-propanyl)phenyl]-1-piperazinecarboxamide |
| bctc |