前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里




查看所有供应商和价格请点击:

1114-41-6生产厂家

1114-41-6价格

1114-41-6

1114-41-6结构式
1114-41-6结构式
  • 常用中文名:胞壁酸
  • 常用英文名:Muramic acid
  • CAS号:1114-41-6
  • 分子式:C9H17NO7
  • 分子量:251.23400
  • 相关类别: 生物化工 糖类化合物 单糖
  • 发布时间:2018-09-12 17:15:35
  • 更新时间:2024-01-02 20:26:31
  • Muramic acid 是许多革兰氏阳性细菌细胞壁中的一种成分,可作为革兰氏阳性细菌的标记物。

化源商城直购

中文名 胞壁酸
英文名 aldehydo-muramic acid
中文别名 2-氨基-3-O-(1-羧乙基)-2-脱氧-D-葡萄糖
英文别名 EINECS 214-214-9
Muramic acid
2-Amino-3-O-(1-carboxyethyl)-2-deoxy-D-glucose
MFCD00213428
描述 Muramic acid 是许多革兰氏阳性细菌细胞壁中的一种成分,可作为革兰氏阳性细菌的标记物。
相关类别
参考文献

[1]. Lappalainen MHJ, et, al. High indoor microbial levels are associated with reduced Th1 cytokine secretion capacity in infancy. Int Arch Allergy Immunol. 2012; 159(2): 194-203.

密度 1.51 g/cm3
沸点 572.4ºC at 760 mmHg
熔点 140-150 °C (dec.)
分子式 C9H17NO7
分子量 251.23400
闪点 300ºC
精确质量 251.10100
PSA 142.47000
外观性状 白色固体
蒸汽压 1.75E-15mmHg at 25°C
折射率 1.575
储存条件

密封储存,储存于阴凉、干燥的库房。

稳定性

常温常压下稳定,避免与酸,氧化剂,还原剂,碱金属,氨,过氧化物接触。

分子结构

1、摩尔折射率:54.9

2、摩尔体积(cm3/mol):166

3、等张比容(90.2K):492.3

4、表面张力(dyne/cm):77.2

5、介电常数:无可用的

6、极化率(10-24cm3):21.76

7、单一同位素质量:251.100502 Da

8、标称质量:251 Da

9、平均质量:251.2338 Da

计算化学

1、 疏水参数计算参考值(XlogP):-4.6

2、 氢键供体数量:5

3、 氢键受体数量:8

4、 可旋转化学键数量:4

5、 互变异构体数量:

6、 拓扑分子极性表面积(TPSA):143

7、 重原子数量:17

8、 表面电荷:0

9、 复杂度:274

10、同位素原子数量:0

11、确定原子立构中心数量:5

12、不确定原子立构中心数量:0

13、确定化学键立构中心数量:0

14、不确定化学键立构中心数量:0

15、共价键单元数量:1

更多

1. 性状:固体

2. 密度(g/mL,25℃):未确定

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):140-150

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,52mmHg):未确定

7. 折射率(n20/D):未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,55ºC):未确定

12. 饱和蒸气压(kPa,25ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

Name: Muramic Acid Hydrate Material Safety Data Sheet
Synonym: Non
CAS: 1114-41-6
Section 1 - Chemical Product MSDS Name:Muramic Acid Hydrate Material Safety Data Sheet
Synonym:Non

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1114-41-6 Muramic Acid, Hydrate 100.0 214-214-9
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use only in a chemical fume hood.
Storage:
Store in a tightly closed container. Keep under an argon blanket.
Store in a cool, dry, well-ventilated area away from incompatible substances. Deep freeze (below -20C).

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1114-41-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 148 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 148 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H17NO7.xH2O
Molecular Weight: 251.24

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1114-41-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Muramic Acid, Hydrate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1114-41-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1114-41-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1114-41-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A
个人防护装备 Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
安全声明 (欧洲) S22-S24/25
危险品运输编码 NONH for all modes of transport
WGK德国 1