Top Suppliers:I want be here
Related CAS#:
916210-98-5 144900-57-2
1220039-41-7 1432754-64-7
1065073-45-1 15924-16-0
859164-65-1 1632285-87-0
149532-90-1 1262771-25-4
1158522-08-7 1805531-60-5
940364-43-2 134104-43-1
131615-57-1 6906-52-1
930439-75-1 1018584-77-4
1806950-00-4 1691199-99-1

916210-98-5

916210-98-5 structure
916210-98-5 structure
Name (2-Chloropyridin-4-yl)methanamine hydrochloride
Synonyms (2-chloropyridin-4-yl)methanamine,hydrochloride
1-(2-Chloro-4-pyridinyl)methanamine hydrochloride (1:1)
4-Pyridinemethanamine, 2-chloro-, hydrochloride (1:1)
Description LOXL2-IN-1 hydrochloride is a selective LOXL2 inhibitor with an IC50 of 126 nM.
Related Catalog
Target

IC50: 126 nM (LOXL2)[1]

In Vitro LOXL2-IN-1 is shown to be selective for LOXL2 over LOX and three other amine oxidases (MAO-A, MAO-B and SSAO). In the human whole blood LOXL2 assay, LOXL2-IN-1 has an IC50 of 1.45 µM compared to 126 nM in the absence of blood proteins. LOXL2-IN-1 shows a 31-fold selectivity for LOXL2+BSA (IC50=190 nM) over LOX+BSA (IC50=5.91 µM). Against a panel of non-LTQ-containing AO enzymes (MAO-A, MAO-B and SSAO), LOXL2-IN-1 is found to be inactive at 30 µM. LOXL2-IN-1 is profiled for the inhibition of three different CYP enzymes (CYPs 3A4, 2C9 and 2D6) and in each case the IC50 is more than 30 µM[1].
References

[1]. Hutchinson JH, et al. Small Molecule Lysyl Oxidase-like 2 (LOXL2) Inhibitors: The Identification of an Inhibitor Selective for LOXL2 over LOX. ACS Med Chem Lett. 2017 Mar 1;8(4):423-427.

Molecular Formula C6H8Cl2N2
Molecular Weight 179.047
Exact Mass 178.006454
PSA 38.91000
LogP 2.69600
Material Safety Data Sheet
Section1. Identification of the substance
Product Name: (2-Chloropyridin-4-yl)methanamine hydrochloride
Synonyms:
Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
Section3. Composition/information on ingredients.
Ingredient name:(2-Chloropyridin-4-yl)methanamine hydrochloride
CAS number:916210-98-5
Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.
Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.
Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:
Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.
Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C6H8Cl2N2
Molecular weight:179.0
Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride.
Section11. Toxicological information
No data.
Section12. Ecological information
No data.
Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.
Section14. Transportation information
Non-harzardous for air and ground transportation.
Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2933399090
HS Code 2933399090
Summary 2933399090. other compounds containing an unfused pyridine ring (whether or not hydrogenated) in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

Chemsrc provides CAS#:916210-98-5 MSDS, density, melting point, boiling point, structure, formula, molecular weight, synthetic route, etc.
title: CAS No. 916210-98-5 | Chemsrc address: https://www.chemsrc.com/en/baike/88928.html

Home | MSDS/SDS Database Search | Journals | Product Classification | Biologically Active Compounds | Selling Leads | About Us | Disclaimer

Copyright © 2024 ChemSrc All Rights Reserved