中文名 | 双吲哚马来酰亚胺 V |
---|---|
英文名 | 3,4-bis(1H-indol-3-yl)-1-methylpyrrole-2,5-dione |
中文别名 |
1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺
双吲哚马来酰亚胺V 双吲哚马来酰亚胺 -甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 |
英文别名 |
Ro 31-6045
2,3-bis(1H-Indol-3-yl)-N-methylmaleimide MFCD00236433 3,4-Di(1H-indol-3-yl)-1-methyl-1H-pyrrole-2,5-dione bisindolylmaleimide v 3,4-bis(3-indolyl)-1-methyl-pyrrole-2,5-dione 1-Methyl-3,4-bis(3-indolyl)maleimide 1H-Pyrrole-2,5-dione,3,4-di-1H-indol-3-yl-1-methyl 1H-Pyrrole-2,5-dione, 3,4-di-1H-indol-3-yl-1-methyl- n-methylbis(indol-3-yl)maleimide |
描述 | 双吲哚甲酰亚胺V是一种用于蛋白激酶C抑制研究的细胞渗透性阴性对照品,IC50值超过100µM[1]。双吲哚甲酰亚胺V阻断体内有丝分裂原刺激蛋白激酶p70s6k/p85s6k(S6K)的激活,IC50为8µM[2]。 |
---|---|
相关类别 | |
参考文献 |
密度 | 1.5±0.1 g/cm3 |
---|---|
沸点 | 655.7±55.0 °C at 760 mmHg |
熔点 | 271°C |
分子式 | C21H15N3O2 |
分子量 | 341.363 |
闪点 | 350.3±31.5 °C |
精确质量 | 341.116425 |
PSA | 68.96000 |
LogP | 3.65 |
外观性状 | 红色固体 |
蒸汽压 | 0.0±2.0 mmHg at 25°C |
折射率 | 1.794 |
储存条件 | 常温常压下稳定,避免与强氧化剂接触。 |
稳定性 | 密封储存,储存于阴凉、干燥的库房。冷藏温度为-20ºC。 |
水溶解性 | DMSO: soluble |
分子结构 | 1、摩尔折射率:100.01 2、摩尔体积(cm3/mol):235.2 3、等张比容(90.2K):697.6 4、表面张力(dyne/cm):77.2 5、介电常数:无可用的 6、极化率(10-24cm3):39.65 7、单一同位素质量:341.116427 Da 8、标称质量:341 Da 9、平均质量:341.3627 Da |
计算化学 | 1.疏水参数计算参考值(XlogP):3 2.氢键供体数量:2 3.氢键受体数量:2 4.可旋转化学键数量:2 5.互变异构体数量:3 6.拓扑分子极性表面积69 7.重原子数量:26 8.表面电荷:0 9.复杂度:604 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
更多 | 1. 性状:固体 2. 密度(g/mL,25℃):未确定 3. 相对蒸汽密度(g/mL,空气=1):未确定 4. 熔点(ºC):未确定 5. 沸点(ºC,常压):未确定 6. 沸点(ºC,10mmHg):未确定 7. 折射率(n20/D):未确定 8. 闪点(ºC):未确定 9. 比旋光度(º):未确定 10. 自燃点或引燃温度(ºC):未确定 11. 蒸气压(mmHg,20ºC):未确定 12. 饱和蒸气压(kPa,25ºC):未确定 13. 燃烧热(KJ/mol):未确定 14. 临界温度(ºC):未确定 15. 临界压力(KPa):未确定 16. 油水(辛醇/水)分配系数的对数值:未确定 17. 爆炸上限(%,V/V):未确定 18. 爆炸下限(%,V/V):未确定 19. 溶解性:未确定 |
Material Safety Data Sheet
Section1. Identification of the substance Product Name: Bisindolylmaleimide v Synonyms: Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section3. Composition/information on ingredients. Ingredient name:Bisindolylmaleimide v CAS number:113963-68-1 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels. Storage: Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Appearance:Not specified Boiling point:No data No data Melting point: Flash point:No data Density:No data Molecular formula:C21H15N3O2 Molecular weight:341.4 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information Non-harzardous for air and ground transportation. Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A |
危害码 (欧洲) | Xi |
---|---|
WGK德国 | 3 |
海关编码 | 2933990090 |
上游产品 9 | |
---|---|
下游产品 3 | |
海关编码 | 2933990090 |
---|---|
中文概述 | 2933990090. 其他仅含氮杂原子的杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0% |
申报要素 | 品名, 成分含量, 用途, 乌洛托品请注明外观, 6-己内酰胺请注明外观, 签约日期 |
Summary | 2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |